Hang a picture on the wall without drilling

No need to peg to hang a picture! Indeed, there are different kinds of fasteners that can happen to the drill. Caution, however, the model used is different depending on whether the substrate is concrete, plaster, wood ...

Concrete Nails

To be a light table (3 kg max) on a wall brick, concrete masonry or other hard, you can use a special point in blued steel, galvanized steel or galvanized. Choose it rather fine, no more than 2 mm in diameter and a length of 25 to 30 mm. Push it diagonally from top to bottom to facilitate the penetration and maintaining the object.

Hook X

This type of fastening system for attaching securely a frame into a wooden wall, plaster or plasterboard.

At one, two or three blued steel hands, it can withstand a load of 5 to 30 kg . Needles feature a brass head not extractable. Their inclination in the hook is designed to flatten the wall and thereby maintain its position. The needles models double or triple sink simultaneously.

Swedish hook

The plastic clip, with three or four points hardened, is specifically designed for mounting in concrete or cement coatings. Short, the tips measure about 15 mm long.

We must give small repeated hammer blows to push into the hard material. The object to be suspended does not exceed 25 kg.

Adhesive hook

In the kitchen or bathroom, it is the most convenient way to suspend an object without having to break the tiles.

To ensure bonding, thoroughly clean the mounting surface. Remove the liner and hook hold the pressure for a few seconds. It is advisable to wait twelve hours before suspending anything.